VSR BALANCING MACHINE

GATETEST & ANGLE RIG

TURBOCHARGER

PUMP TEST BENCH

SAND BLASTING MACHINE

MARKING MACHINE

PARTICAL PENDULUM TESTER

 

 

 





Replacement Of The New Turbocharger

  Before customers replace the turbocharger, first of all we have to clean the oil sump and the oil inlet pipe. Replace the oil and the oil filter (Before the new oil filter is installed we need to fill it with oil) to make sure the oil entering the turbocharger is clean (the granules<30¦Ì). The air filter needs to be replaced as well.

  Steps of cleaning:

  1.Pours away the dirty oil in engine completely.

  2. Dismantle the oil sump and clean it, then install it back to the engine again.

  3.Dismantle the oil inlet pipe of the turbocharger, and eliminate the dirt oil and impurities in the tube, clean the internal wall of the pipe, then install it back to the engine.

  4. Add new oil which conforms to the stipulation trademarks by the engine manufactory.

  5. Replace the new oil filter which conforms to the stipulation trademarks by the engine manufactory.

  6. Do not install the turbocharger at this stage. Connect the oil inlet pipe with the oil return pipe. Start the engine, and run for 3~5 minutes under idle operating mode.

  Only install the new turbocharger after you complete all the processes above. The customer should follow the installation criteria of our company. Before installing the oil inlet pipe, please add new oil at the oil inlet of the turbocharger fully.


--- WUXI TURBO AUTO POWER CO.,Ltd.---
--- Add£ºNo.203-1, ChengNan Road TEL£º+86-510-85733403 FAX£º+86-510-85368586---
--- ---